Ancient Viking Sword Used Technology From The Future: The Ulfberht Viking Sword

The Vikings are often portrayed as crude people that should be feared, but in reality, they left behind an important legacy that has resounded throughout history. Among them are the mysterious Uflberht swords – medieval weapons of warfare which were considered to be very advanced for its time. These ancient artifacts have puzzled archaeologists for years, with many wondering about the identity of the people who made them and how the Vikings managed to forge such weapons thousands of years ahead of the technology that would have made creating them possible.

What Are Ulfberht Swords?

The Ulfberht swords are a group of medieval swords found in Europe, and are dated between the 9th and the 11th centuries. These weapons are at the transitional point between the Viking sword and the high medieval knightly sword. They are also considered to be the starting point of the high medieval tradition of inscribing sword blades.  

The blades were inlaid with the inscription of the Ulfberht name and two crosses (+VLFBERHT+), with the name “Ulfberht” believed to be a Frankish personal name that became the basis of a trademark of sorts and was also used by multiple bladesmiths for several centuries. This made the Ulfberht like a medieval luxury brand for swords, as they were of such high quality that some people consider these blades as almost mystical.

Thousands of Ulfberht swords were found across Europe, and most of them were found in rivers or were excavated from Viking burials across Europe and Scandinavia. However, only around 170 swords are proven to be authentic Ulfberht swords. They have been buried for centuries, making these found artifacts only shadows of the ancient masterpieces of weaponry that they once were.

Who Made the Ulfberht Swords?

The Ulfberht swords dominated the battlefield across different parts of Europe. These weapons were attributed to the Vikings and were used by many nations from about 800 to 1100 AD. They were only used by a few select warriors at the time as they were a masterpiece built from pure steel. After this period, the swords disappeared in Europe for at least a thousand years before weapons of this quality surfaced again around the 18th

Why these medieval swords have the inscription of Ulfberht continue to be an enigma until now as the name does not appear in written texts that existed around that time. The fact that the Ulfberht swords appear for over two hundred years is proof that they were not forged by a single craftsman. The name “Ulfberht” could have been the name of the location these weapons were produced, but it could also have been inscribed to the blades as proof of its authenticity. These premium-grade swords were so well-known in European battlefields at the time that hundreds – and maybe even thousands - of imitations of these swords were made, and even these knock-offs were of very good quality as well.

The crosses found in the inscriptions on the Ulfberht swords could suggest that these weapons have a connection with the Roman Catholic Church. This makes sense since the church dominated the Frankish Empire and was also a major producer and dealer of weapons during that time. It was also the practice by bishops and abbots to place the Greek cross before names, so it may also be possible that the Ulfberht name could have been the name of a bishop, abbot or even a monastery. However, many researchers also believe that Ulfberht was one of the most ancient trademarks, serving as sign of high quality weaponry.

Composition & Quality of the Ulfberht Swords

What makes the Ulfberht blades so special is the fact that these blades’ metal was comparable to the strength and quality of modern steel. Most Viking blades and the blades in the rest of Europe made at the time were composed of low-quality steel that could shatter like glass. This is the reason why it is such an enigma how the Ulfberht swords were so advanced when medieval blacksmiths in Europe have yet to possess the knowledge and technology to make weapons as strong, as light and as flexible as the blades that were widely made and could only have existed several centuries later.

To create a sword in the same quality as the Ulfberht blades, the inclusion and distribution of carbon is key. If a sword’s carbon content is not controlled to just the right amount, the sword will either be too soft or too brittle. However, with just the right amount of carbon, this element can significantly strengthen the blade. In fact, the carbon content of Ulfberht swords is about three times higher than that of the bladed weapons around the same time.

Also, in the process of forging iron, the ore has to be liquefied so that the blacksmith could remove the metal’s impurities known as “slag.” To make the ore’s liquefication possible, it must be heated to 3,000 degrees Fahrenheit, which is what is done in modern times. However, what’s interesting about this is that medieval blacksmiths in Europe could not make slag-free steel because their fires were not hot enough to completely liquefy the iron. Instead, in the Viking era, carbon could mainly be introduced through coal in the fire, and the only way to remove the slag from the metal was to just try to hammer out the impurities with every strike.

Theories About the Origins of the Ulfberht Swords

According to the research of Dr. Alan Williams, a consultant archaeometallurgist at the Wallace Collection, who analyzed the Ulfberht swords, the metal used in these ancient weapons is known today as crucible steel. Crucible steel is created by meting iron along with other materials mixed in a crucible and then pouring that molten metal into a mold.

At the time that the Ulfbehrt swords were produced, no one in Europe knew how to melt iron at extreme temperatures for centuries. Crucible steel was not even around the continent until the Industrial Revolution in the 18th century. So, how did the Vikings manage to forge blades that required this advanced technology around a thousand years earlier?

The Vikings were not just excellent and fearless warriors, they were also advanced in a lot of ways so much so that they were also known to be highly skilled traders and navigators. Many artifacts discovered in modern-day Scandinavia have originated from Asia, India and several Eastern parts of the world, which led many experts to believe that the Vikings have managed to somehow reach continents as distant as the Americas and Asia.

Asia was home to the greatest swordsmiths who forged the greatest swords in human history, and one of them incudes the Damascus steel, which was determined to have similar compositions to the metal content of the Ulfberht swords. This has led to one theory that the Ulfberht swords originated from modern-day Iran. Researchers suggest that the Viking acquired the materials they needed to make the Ulfberht swords by trading with merchants back when the Volga Trade route was opened around the same time.

However, another theory suggests that the Ulfberht blades had nothing to do with the steel forged in the Middle East. According to Robert Lehmann, a chemist at the Institute for Inorganic Chemistry at the University of Hannover, the material of the Ulfberht sword they found in 2012 in the Weser River in northwestern Germany does not come from the East. The sword’s blade has a high manganese content while its guard was made from iron with a high arsenic content, both of which suggest that the materials used to make the sword were European in origin. Lehmann traced the origin of the sword to a site in the Taunus region, located north of Frankfurt, Germany – a region where some monasteries were known to have created weapons at the time. It is important to note, however, that the Ulfberht name has not been found in the records of these weapon-making monasteries in the area.

While we may have taken several steps closer to unraveling the mystery behind the Ulfberht swords, it is still a glaring fact that we do not have all the knowledge there is to know about this ancient artifact from the Vikings. Nevertheless, we can say for certain that the Ulfberht swords are important testaments to the legacy that the Vikings have left behind as fearless warriors and as a military force to be reckoned with during what has become known as the Viking age. These special swords also serve as proof of the painstaking lengths taken by great swordsmiths of the time to forge weapons of impressive quality that even modern swordsmiths admit to be a very complicated task though they possess the knowledge and technology that weapon makers of the Viking era did not.


Sources:

https://en.wikipedia.org/wiki/Ulfberht_swords
http://www.ancient-origins.net/artifacts-ancient-technology/step-closer-mysterious-origin-viking-sword-ulfberht-002455?nopaging=1
http://www.ancientpages.com/2014/02/11/unravelling-mystery-ulfberht-sword-ancient-viking-artifact-far-ahead-time/
http://www.dailymail.co.uk/sciencetech/article-2878512/The-mystery-magical-superstrong-Viking-sword-Researchers-close-supermonks-believed-forged-weapons.html
http://ancientexplorers.com/blog/ulfberht-the-sword-made-with-tech-from-the-future/
http://www.theepochtimes.com/n3/1134288-a-step-closer-to-the-mysterious-origin-of-the-viking-sword-ulfberht/
http://www.hexapolis.com/2015/05/11/the-curious-case-of-ulfberht-the-viking-sword-with-seemingly-futuristic-technology/
https://en.wikipedia.org/wiki/Vikings

Malta’s Cart Ruts - Proof of Ancient Advanced Civilizations?

The surface of the islands of Malta and Gozo in the Maltese archipelago is known for the hundreds, perhaps even thousands, of parallel lines that appear to have been carved deep into the country’s stony ground. These ancient Maltese tracks – or what some refer to as “cart ruts” – have been found in obvious locations as well as the most unusual places – be it under the sea, off the coast, or at cliff edges. This has led many to believe that the grooves in Malta’s bedrock are of prehistoric origin. These cart tracks are also deemed to be unique, and they continue to be an enigma to this very day, as they have not been satisfactorily explained by those who have extensively studied them.

Brief Information on the Cart Ruts Found in Malta

Cart ruts are man-made dual channels or parallel tracks and grooves sunken in rock. The ruts themselves can vary greatly in their size – some can be very deep and narrow, others can be shallow and wide, and the rest could be anything in between. They are carved in both smooth and rough rocky surface. And like in the case of the cart ruts found on the surface of the islands of Malta, these parallel grooves can be etched into a limestone bedrock.

In Malta, the cart ruts appear to be in single pairs or in groups, and they are typically perfectly parallel. These ancient channels have an approximate depth of 8 to 15 centimeters, but in some places, they could be as deep as about 60 centimeters. The ruts have a standard gauge of around 1.4 meters, but this can also vary by several centimeters. Some of the tracks cross each other while others branch out to form junctions, which creates an illusion that resembles a large railway switching yard. These grooves run through the island’s valleys but they have also been found on the hills, while some have disappeared into the Mediterranean Sea.

While the cart ruts on Malta are impressive structures, they do not exclusively exist in this country. In fact, similar formations can also be found in Sicily, Sardinia, Italy, Greece, Southern France and Cyrenaica. However, not all of these dual channels in different parts of Europe are of the same origin, neither do they all fulfill the same purpose.

Examples of the Maltese Cart-Ruts

binari_mains.jpg

In Malta itself, there are potentially as many as 150 sites that have cart ruts, including the ones found in St. Paul’s Bay, Naxxar, San Gwann and Bidnija. However, the most well-known site in the archipelago is the Misrah Ghar il-Kbir, which is more popularly referred to as the “Clapham Junction.”

The Clapham Junction is located on the southern side of the Maltese island and features an enormous number of tracks, making it the largest concentration of cart ruts in the country. The site was given the nickname “Clapham Junction” because the network of overlapping cart tracks on the surface resembled the busy rail station of the same name in London. The sunken grooves at the site have varying gauges, depths and widths. They are also shaped differently, with some narrowing at the bottom, while others remain flat.

Possible Dates When the Cart Ruts in Malta Were Created

Some researchers have connected the mysterious tracks to the temple sites found in the islands of Malta and Gozo. More than 30 stone temple complexes as well as other ancient structures on the Maltese island were dated to have been built from 5500 to 2500 BC, making them some of the oldest free-standing monuments on the planet that we currently know about. It is even believed that the cart ruts might turn out to be the proof some experts have been looking for in answering the puzzle of how these ancient temples were built during what was supposed to be a primitive time.

It is also hypothesized that these manmade dual channels were created by settlers who arrived in Malta from Sicily sometime in the beginning of the country’s Bronze Age, or around 2000 B.C. However, Maltese archaeologist Anthony Bonanno has also presented an alternative theory about the date of the cart ruts on the island, suggesting that the tracks could be Phoenician constructions that were made more recently, possibly in the 7th century B.C.

How the Cart Ruts in Malta Were Created

How the Cart Ruts in Malta Were Created

As to how the ruts in Malta were made or created, some archaeologists assumed that they were inadvertently carved by using some form of vehicles that were possibly wheeled. These carts, sleds or skids could have carried heavy loads, and with people repeatedly using the same path or route for decades or even centuries, the island’s limestone ground was inevitably scarred over time as a consequence.

However, some have objected to the hypothesis that all of the ruts on Malta were caused by wheeled carts or sleds carrying heavy goods. They argued that some of the tracks appeared to be too perfectly formed as if they might have been carved by hand using special tools. One such individual is author and journalist Graham Hancock, and in his book, “Underworld: The Mysterious Origins of Civilization,” he said:

“It is certain, too, that they were not simply worn away in the tough limestone by the passage of cart-wheels over periods of centuries, as many have wrongly theorized; on the contrary, there is no proof whatsoever that cart-wheels ever ran in these ruts - which were initially carved out of the bedrock with the use of tools.”

The Purpose Behind the Cart Ruts in Malta

If the people residing on the island of Malta created and deliberately shaped these enigmatic ruts, then these channels obviously played a valuable purpose in the lives of these ancient people. However, what exactly that role is have been lost with the passage of time, and experts who have allotted much of their time and a significant portion of their lives to study these cart ruts have yet to universally agree on what their original purpose could be.  And because these experts have failed to come into an agreement on this matter, alternative theories have gained popularity in providing more out-of-this-world yet equally-fascinating answers to this mystery.

Theories on the Purpose of Malta’s Cart Ruts

Many different theories have been presented in attempt to provide the most plausible answers to the mysterious questions of when these car ruts on Malta were created, how they were created, and why they were created in the first place.

One of the wildest speculations of what the cart ruts’ intended purpose could be is that the they are the tracks of outer space landing craft. There also those who believe that the scars on Malta’s milestone bedrock might be coded messages to the gods. But a more popular yet also far-fetched theory is that archipelago of Malta is actually an existing part of the legendary lost city of Atlantis.

Of course, there are also other theories that have been presented over the years, which many people find to be a lot easier to consider and believe. One theory is that the cart ruts in Malta were constructed for the purpose of transporting agricultural produce, and that the tracks were designed in such a way that would have allowed cows pulling these carts to get back home on their own.

Australian archaeologist Claudia Sagona from Birmingham University has a different idea on what the ancient channels found in this country are for. Sagona argued that the cart ruts were actually irrigation ditches from the Stone Age. According to her, in ancient times, torrential rains had washed away the island’s topsoil, and so, the farmers of that time had no other choice but to invent new ways of tending to their crops. She suggested that the Maltese farmers carved this network of trenches into the island’s limestone bedrock to channel away and conserve rain water, and to protect the soil.

Another likely purpose of the cart ruts is that they transported stones from ancient quarries across the island. This theory was suggested by archaeologist Anthony Bonanno, and a few of those who conducted a detailed survey of the Clapham Junction agreed that many of the channels found on the Maltese island are associated with the nearby quarries of the time. Transportation of stones from these quarries via the cart ruts found in different parts of the island supposedly made the construction of the ancient temples in Malta possible. This network of tracks is also believed to have been utilized by people for the exportation of quarried stones to Africa.

Though some of these theories are undeniably appealing and quite popular, none of them are completely devoid of flaw in their line of reasoning. And so, until now, there is still no consensus on what the original purpose of the cart ruts on Malta could be, especially since experts supporting one theory have cleverly presented arguments casting doubt on the plausibility of another theory, and vice versa.

For now, there is no doubt that the enigmatic cart ruts found in Malta will continue to remain unsolved in the foreseeable future in terms of its true purpose, the exact means through which they were formed, or the accurate dates of when these tracks were created and how long they were regularly used by the ancient civilization that once lived there.

And while not many are willing to entertain the idea that the cart ruts on Malta are proof that a highly advanced ancient civilization once dominated the area, these ancient networks of parallel trenches and channels are, at the very least, a testament and reminder that perhaps our ancient ancestors are more advanced and enlightened than we give them credit for. Besides, even without insisting its archaeological merits, it remains undeniable that these ancient tracks are truly a fascinating as well as a puzzling sight to behold.


Sources:

http://www.atlasobscura.com/places/malta-cart-tracks
https://www.theguardian.com/world/2003/oct/04/arts.artsnews
http://www.jstor.org/stable/3060511?seq=1#page_scan_tab_contents
http://www.ancient-wisdom.com/maltacartruts.htm
https://en.wikipedia.org/wiki/Misra%C4%A7_G%C4%A7ar_il-Kbir
http://www.amusingplanet.com/2014/02/the-mysterious-cart-tracks-of-malta.html
http://www.messagetoeagle.com/unknown-highly-advanced-civilization-created-maltas-cart-ruts-with-sophisticated-machinery/
http://www.ancient-origins.net/unexplained-phenomena/prehistoric-lines-across-malta-cart-ruts-misrah-ghar-il-kbir-020312?nopaging=1
http://www.cartrutsmalta.com/what-are-cart-ruts/
http://philipcoppens.com/cartruts.html
http://www.amusingplanet.com/2014/02/the-mysterious-cart-tracks-of-malta.html